GW Instek PEL-3000 Series Programming Manual - Manual (Page 82)

PEL-3000 Programming Manual
80
Example :RESistance:VA MIN
Sets the resistance value to the minimum.
Query example :RESistance:VA?
> 0
Returns the “A Value” conductance setting(MHO).
:RESistance:VB
Set
Query
Description Sets or queries the CR mode “B Value” resistance.
This command is applicable to static mode only.
Note: A different value can be set for each current
range (High/Mid/Low).
Syntax :RESistance:VB {[ MHO ] | MINimum |
MAXimum }
Query Syntax :RESistance:VB?
Parameter [ MHO ] “B Value” conductance
value
MINIMUM or MIN Minimum conductance
level
MAXIMUM or MAX Maximum conductance
level
Return parameter Returns the “B Value”
conductance value.
Example :RESistance:VB MIN
Sets the resistance value to the minimum.
Query example :RESistance:VB?
> 0
Returns the “B Value” conductance setting(MHO).
:RESistance:SRATe
Set
Query
Description Sets or queries the current slew rate for CR static
mode.