GW Instek PEL-3000 Series Programming Manual - Manual (Page 85)

COMMNAND OVERVIEW
83
Syntax :RESistance:SET { | MINimum | MAXimum }
Query Syntax :RESistance:SET?
Related
Commands :RESistance:LEVel
Parameter
“Set” conductance value
MINIMUM or MIN Minimum conductance
level
MAXIMUM or MAX Maximum conductance
level
Return parameter Returns the “Set”
conductance value.
Example :RESistance:SET MIN
Sets the conductance to the minimum.
Query example :RESistance:SET?
>.200
Returns the “Set” conductance setting in MHO.
:RESistance:LEVel
Set
Query
Description Sets or queries the CR mode % level (percentage of
the Set conductance value) when the dynamic
mode units are set to Percent.
Syntax :RESistance:LEVel { | MINimum | MAXimum }
Query Syntax :RESistance:LEVel?
Related
Commands :RESistance:SET
Parameter “% level” conductance
value
MINIMUM or MIN Minimum % conductance
level
MAXIMUM or MAX Maximum % conductance
level
Return parameter Returns the “% level”
conductance value.