GW Instek PEL-3000 Series Programming Manual - Manual (Page 87)

COMMNAND OVERVIEW
85
Related
Commands :RESistance:RISE
Parameter Falling current slew rate
[ mA/us]
MINIMUM or MIN Minimum slew rate
MAXIMUM or MAX Maximum slew rate
Return parameter Returns the falling current
slew rate in mA/us.
Example :RESistance:FALL MIN
Sets the falling slew rate to the minimum.
Query example :RESistance:FALL?
>50.000
Returns the falling slew rate as 50mA/us.
:RESistance:T1
Set
Query
Description Sets the T1 timer settings for the CR dynamic
mode.
Syntax :RESistance:T1 {[s] | MINimum | MAXimum}
Query Syntax :RESistance:T1?
Related
Commands :RESistance:T2
Parameter [s] T1 timer setting in
seconds
MINIMUM or MIN Minimum time
MAXIMUM or MAX Maximum time
Return parameter Returns the T1 timer time
in seconds.
Example :CURRent:T1 0.200
:CURRent:T1 0.200s
:CURRent:T1 200 ms
Sets the T1 timer time to 200ms.