GW Instek PEL-3000 Series Programming Manual - Manual (Page 94)

PEL-3000 Programming Manual
92
:POWer:VB
Set
Query
Description Sets or queries the CP mode “B Value” power. This
command is only applicable to static mode.
Note: A different “B Value” can be set to different
current ranges.
Syntax :POWer:VB {[ W ] | MINimum | MAXimum }
Query Syntax :POWer:VB?
Parameter [W] “B Value” power value
MINIMUM or MIN Minimum power level
MAXIMUM or MAX Maximum power level
Return parameter Returns the “B Value”
power value.
Example :POWer:VB MIN
Sets the power value to the minimum.
Query example :POWer:VB?
>10W
Returns the “B Value” power setting.
:POWer:L1
Set
Query
Description Sets or queries the CP mode “Level1” power. This
command is applicable to dynamic mode only.
Note: A different “Level1” value can be set for
different current ranges.
Syntax :POWer:L1 {[ W ] | MINimum | MAXimum }
Query Syntax :POWer:L1?
Parameter [ W ] “Level1” power value
MINIMUM or MIN Minimum power level
MAXIMUM or MAX Maximum power level
Return parameter Returns the “Level1”
power value.