GW Instek PEL-3000 Series Programming Manual - Manual (Page 69)

COMMNAND OVERVIEW
67
Mode Subsystem Commands
:MODE .................................................................................. 67
[:MODE]:CRANge............................................................... 67
[:MODE]:VRANge .............................................................. 68
[:MODE]:RESPonse ............................................................ 68
[:MODE]:DYNamic............................................................. 69
:MODE
Set
Query
Description Sets the operating mode.
Syntax :MODE {CC | CR | CV | CP | CCCV | CRCV | CPCV }
Query Syntax :MODE?
Parameter/Return
parameter CC CC mode
CR CR mode
CV CV mode
CP CP mode
CCCV CC + CV mode
CRCV CR + CV mode
CPCV CP + CV mode
Example :MODE CC
Sets the mode to CC mode.
Query example :MODE?
>CC
Returns the operating mode (CC mode).
[:MODE]:CRANge
Set
Query
Description Configures the current range for all the applicable
operating modes.
Syntax [:MODE]:CRANge {HIGH | MIDDle | LOW }
Query Syntax [:MODE]:CRANge?