GW Instek PEL-3000 Series Programming Manual - Manual (Page 130)

PEL-3000 Programming Manual
128
Syntax :UTILity:LOAD {OFF|ON|LOAD|PROG|NSEQ|FSEQ}
Query Syntax :UTILity:LOAD?
Parameter OFF Turns Auto Load off.
ON Turns Auto Load on. This
will turn the load on
automatically at start up.
The type of load function
that is automatically
turned on is configured
below.
LOAD Configure the load to
automatically turn on in
CC, CR, CV or CP mode.
PROG Configure the load to
automatically turn on a
program sequences.
NSEQ Configure the load to
automatically turn on a
normal sequence.
FSEQ Configure the load to
automatically turn on a
fast sequence.
Return Parameter Load:On|Off, Load
On:Load|Prog|NSeq|FSeq
Example :UTILity:LOAD ON FSEQ
Configures the unit to automatically turn fast
sequences on at start up (with the load on).
Query example
:UTILity:LOAD?
> Load:On, Load On:Prog
The unit is configured to automatically turn Programs
on at start up (with the load on).
:UTILity:LOAD:MODE
Set
Query
Description Sets or queries the Load Off (Mode) setting. This is
equivalent to the settings in the
Shift+UTILITY>Load menu.