GW Instek PEL-3000 Series Programming Manual - Manual (Page 39)

COMMNAND OVERVIEW
37
Input State Commands
:INPut ..................................................................................... 37
:INPut:SHORt ...................................................................... 37
:INPut:MODE ...................................................................... 38
:INPut
Set
Query
Description Sets or queries the status of the load.
Syntax :INPut {|OFF | ON }
Query Syntax :INPut?
Parameter OFF or 0 Load = OFF
ON or 1 Load = ON
Return parameter 0 Load = OFF
1 Load = ON
Example :INPut ON
Turns the load on.
Query example :INPut?
>0
Indicates that the load is off.
:INPut:SHORt
Set
Query
Description Shorts or opens the input terminals or queries their
status.
Syntax :INPut:SHORt {|OFF | ON }
Query Syntax :INPutSHORt?
Parameter OFF or 0 Short = OFF
ON or 1 Short = ON
Return parameter 0 Short = OFF
1 Short = ON
Example :INPut:SHORt ON
Shorts the input terminals.