Step resolution commands, Configure]:step:cch – GW Instek PEL-3000 Series Programming Manual User Manual
Page 58
PEL-3000 Programming Manual
56
Step Resolution Commands
[:CONFigure]:STEP:CCH ................................................... 56
[:CONFigure]:STEP:CCM .................................................. 57
[:CONFigure]:STEP:CCL .................................................... 57
[:CONFigure]:STEP:CC ...................................................... 58
[:CONFigure]:STEP:CRH ................................................... 58
[:CONFigure]:STEP:CRM .................................................. 59
[:CONFigure]:STEP:CRL .................................................... 60
[:CONFigure]:STEP:CR ...................................................... 60
[:CONFigure]:STEP:CVH................................................... 61
[:CONFigure]:STEP:CVL ................................................... 61
[:CONFigure]:STEP:CV ...................................................... 62
[:CONFigure]:STEP:CPH ................................................... 62
[:CONFigure]:STEP:CPM ................................................... 63
[:CONFigure]:STEP:CPL .................................................... 63
[:CONFigure]:STEP:CP ...................................................... 64
[:CONFigure]:STEP:CCH
Set
Query
Description
Configures the step resolution for CC High Range.
Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax
[:CONFigure]:STEP:CCH {
MAXimum }
Query Syntax
[:CONFigure]:STEP:CCH?
Parameter
Step resolution.
MINIMUM or MIN
Minimum step resolution
MAXIMUM or MAX
Maximum step resolution
Return parameter
Returns the range and the
step resolution.
Example
:STEP:CCH 0.002A
Sets the step resolution to 0.002A.