GW Instek PEL-3000 Series Programming Manual - Manual (Page 96)

PEL-3000 Programming Manual
94
Related
Commands :POWer:LEVel
Parameter [ W ] “Set” power value
MINIMUM or MIN Minimum power level
MAXIMUM or MAX Maximum power level
Return parameter Returns the “Set” power
value.
Example :POWer:SET MIN
Sets the power value to the minimum.
Query example :POWer:SET?
>10W
Returns the “Set” power setting.
:POWer:LEVel
Set
Query
Description Sets or queries the CP mode % level (percentage of
the Set power value) when the dynamic mode
units are set to Percent.
Syntax :POWer:LEVel { | MINimum | MAXimum }
Query Syntax :POWer:LEVel?
Related
Commands :POWer:Set
Parameter “% level” power value
MINIMUM or MIN Minimum % power level
MAXIMUM or MAX Maximum % power level
Return parameter Returns the “% level”
current value.
Example :POWer:LEVel MIN
Sets the % level power value to the minimum.
Query example :POWer:LEVel?
>50
Returns the “% Level” as 50 percent.