GW Instek PEL-3000 Series Programming Manual - Manual (Page 114)

PEL-3000 Programming Manual
112
:NSEQuence:MODE
Set
Query
Description Sets or queries the mode used for the normal
sequence.
Syntax :NSEQuence:MODE {CC|CR|CV|CP}
Query Syntax :NSEQuence:MODE?
Parameter CC Constant current mode
CR Constant resistance mode
CV Constant voltage mode
CP Constant power mode
Return Parameter Mode: CC|CR|CV|CP
Example :NSEQuence:MODE CC
Sets the mode to CC.
Query example :NSEQuence:MODE?
>Mode: CC
Returns the mode.
:NSEQuence:RANGe
Set
Query
Description Sets or queries the range used for the normal
sequence.
Syntax :NSEQuence:RANGe
{ ILVL|IMVL|IHVL|ILVH|IMVH|IHVH }
Query Syntax :NSEQuence:RANGe?
Parameter ILVL Low I range, low V range
IMVL Middle I range, low V range
IHVL High I range, low V range
ILVH Low I range, high V range
IMVH Middle I range, high V range
IHVH High I range, high V range
Return Parameter Returns the range in the following
format:
Range: ILVL