GW Instek PEL-3000 Series Programming Manual - Manual (Page 119)

COMMNAND OVERVIEW
117
:NSEQuence:EDIT:END?
Set
Query
Description Returns the number of points in the sequence.
Query Syntax :NSEQuence:EDIT:END?
Return parameter 1~1000
Query example :NSEQuence:EDIT:END?
> 20
Indicates that there are 20 steps in the sequence.
:NSEQuence[:DELet]:ALL
Set
Description Deletes all the data points for the normal sequence.
Syntax :NSEQuence[:DELet]:ALL
Example :NSEQuence:ALL
:NSEQuence:SAVE
Set
Description Saves the data points for the normal sequence.
Syntax :NSEQuence:SAVE
Example :NSEQuence:SAVE
:FSEQuence:STATe
Set
Query
Description Sets or queries the state of the Fast Sequence
function.
Syntax :FSEQuence:STATe {ON | OFF}
Query Syntax :FSEQuence:STATe?
Parameter ON Turn fast sequence on
OFF Turn fast sequence off
Return Parameter ON,STOP Fast sequence is on
RUN,STOP Fast sequence is running
OFF Fast sequence is off