GW Instek PEL-3000 Series Programming Manual - Manual (Page 147)

COMMNAND OVERVIEW
145
Query example :STATus:OPERation:CONDition?
>32
Indicates that the unit is waiting for a trigger.
:STATus:OPERation:ENABle
Set
Query
Description Sets which events are enabled in the Operation
Status Enable register. The mask values are the bit
weights of the events. See page 155 for details.
Syntax :STATus: OPERation:ENABle
Query Syntax :STATus: OPERation:ENABle?
Parameter/
Return Parameter Condition Condition
1 CAL All other
bits Not used
32 WTG
Example :STATus:OPERation:ENABle 32
WTG is enabled in the OPERation Status Enable
register.
Query example
:STATus:OPERation:ENABle?
>32
Indicates that the WTG bit is enabled in the Operation
Status Enable register.
:STATus:OPERation[:EVENt]?
Set
Query
Description Returns the status of the Operation Status Event
register. The register is cleared upon reading. See
page 155 for details.
Query Syntax :STATus:OPERation[:EVENt]?
Return parameter Condition Condition
1 CAL All other
bits Not used
32 WTG
Query example :STATus:OPERation:EVENt?
> 1
Indicates that unit is currently calibrating.