GW Instek PEL-3000 Series Programming Manual - Manual (Page 168)

PEL-3000 Programming Manual
166
-224 Illegal parameter value Used where an exact value, from
a list of possibilities, was
expected.
-225 Out of memory. The device has insufficient
memory to perform the requested
operation.
-226 Lists not same length. Attempted to use LIST structure
having individual LIST’s of
unequal lengths.
-230 Data corrupt or stale Possibly invalid data; new
reading started but not completed
since last access.
-231 Data questionable Indicates that measurement
accuracy is suspect.
-232 Invalid format Indicates that a legal program
data element was parsed but
could not be executed because the
data format or structure is
inappropriate.
-233 Invalid version Indicates that a legal program
data element was parsed but
could not be executed because the
version of the data is incorrect to
the device.
-240 Hardware error Indicates that a legal program
command or query could not be
executed because of a hardware
problem in the device.
-241 Hardware missing Indicates that a legal program
command or query could not be
executed because of missing
device hardware.
-250 Mass storage error Indicates that a mass storage
error occurred.