GW Instek PEL-3000 Series Programming Manual - Manual (Page 172)

PEL-3000 Programming Manual
170
-292 Referenced name does not
exist
-293 Referenced name already exists
-294 Incompatible type Indicates that the type or
structure of a memory item is
inadequate.
Device Specific Errors
-300 Device-specific error This is the generic device-
dependent error for devices that
cannot detect more specific
errors.
-310 System error Indicates that some error, termed
“system error” by the device, has
occurred.
-311 Memory error Indicates some physical fault in
the device’s memory, such as
parity error.
-312 PUD memory lost Indicates that the protected user
data saved by the *PUD
command has been lost.
-313 Calibration memory lost Indicates that nonvolatile
calibration data used by the
*CAL? command has been lost.
-314 Save/recall memory lost Indicates that the nonvolatile data
saved by the *SAV? command
has been lost.
-315 Configuration memory lost Indicates that nonvolatile
configuration data saved by the
device has been lost.