GW Instek PEL-3000 Series Programming Manual - Manual (Page 52)

PEL-3000 Programming Manual
50
TOGGLE or TOGG Sets the button
configuration to toggle
Return parameter Toggle Toggle
Hold Hold
Example :CONFigure:SHORt TOGGle
Sets the Short key configuration to toggle.
Query example :CONFigure:SHORt?
>Toggle
The Short key is configured to toggle.
[:CONFigure]:GNG:SPECtest
Set
Query
Description Enables/Disables Go-NoGo testing (SPEC test =
ON/SPEC test = OFF).
Syntax [:CONFigure]:GNG:SPECtest {|OFF | ON }
Query Syntax [:CONFigure]:GNG:SPECtest?
Parameter/
Return parameter OFF or 0 SPEC test = OFF
ON or 1 SPEC test = ON
Example :GNG:SPECtest ON
Turns Go-NoGo testing on.
Query example :GNG:SPECtest?
>OFF
Indicates that Go-NoGo testing is off.
[:CONFigure]:GNG:DTIMe
Set
Query
Description Sets or queries the Go-NoGo delay time.
Syntax [:CONFigure]:GNG:DTIMe {[s] | MINimum
|MAXimum }
Query Syntax [:CONFigure]:GNG:DTIMe?
Parameter [s] Sets the Go-NoGo delay
time in seconds (0.0~1.0)
with 0.1 second resolution.
MINIMUM or MIN Minimum delay time
MAXimum or MAX Maximum delay time