GW Instek PEL-3000 Series Programming Manual - Manual (Page 104)

PEL-3000 Programming Manual
102
:PROGram:STEP
Set
Query
Description Sets or queries the step number for the program
sequence.
Syntax :PROGram:STEP {}
Query Syntax :PROGram:STEP?
Parameter (1~16) step number
Return Parameter Step:
Example :PROGram:STEP 1
Sets the step number to 1.
Query example :PROGram:STEP?
>Step:1
Returns the step number (1).
:PROGram:MEMory
Set
Query
Description Sets or queries the memory number for the
program sequence.
Syntax :PROGram:MEMory{}
Query Syntax :PROGram:MEMory?
Parameter (1~256) memory number
Return Parameter Memory:M
Example :PROGram:MEMory 1
Sets the memory number to 1.
Query example :PROGram:MEMory?
>Memory:M 1
Returns the memory number (1).
:PROGram:RUN
Set
Query
Description Sets or queries the “Run” state for the selected
program step in the program sequence.