GW Instek PEL-3000 Series Programming Manual - Manual (Page 46)

PEL-3000 Programming Manual
44
Query Syntax [:CONFigure]:OVP?
Parameter [V] voltage limit value.
MINIMUM or MIN MINIMUM value.
MAXIMUM or MAX MAXIMUM value.
Return parameter Returns the OVP level ().
Example1
:OVP 10.00
Sets the OVP setting to 10V.
Query example :OVP?
> 10.0000
The OVP setting is 10.0000V.
[:CONFigure]:SSTart
Set
Query
Description Sets or queries the Soft Start time setting.
Syntax [:CONFigure]:SSTart {[s] | MINimum|
MAXimum | OFF }
Query Syntax [:CONFigure]:SSTart?
Parameter [s] The soft start time in
seconds.
MINIMUM or MIN Minimum time = 0 second
MAXIMUM or MAX Maximum time
OFF OFF = 0 second
Return parameter Returns the soft start time
in seconds.
OFF Off
Example :SSTart OFF
Turns the soft start function off.
Query example :SSTart?
>OFF
The soft start function is off.