GW Instek PEL-3000 Series Programming Manual - Manual (Page 21)

COMMNAND OVERVIEW
19
Command
Format 1.00A
1 2 3 4
:CURRent:Set
1. Command header
2. Space 3. Parameter 1
4. Unit or suffix.
Common
Input Parameters Type Description Example
boolean logic 0, 1
integers 0, 1, 2, 3
decimal
numbers 0.1, 3.14, 8.5
floating point 4.5e-1, 8.25e+1
any of NR1, 2, 3 1, 1.5, 4.5e-1
[MIN]
(Optional
parameter) For commands, this will set the
setting to the lowest value. This
parameter can be used in place of
any numerical parameter where
indicated.
For queries, it will return the
lowest possible value allowed for
the particular setting.
[MAX]
(Optional
parameter) For commands, this will set the
setting to the highest value. This
parameter can be used in place of
any numerical parameter where
indicated.
For queries, it will return the
highest possible value allowed
for the particular setting.
Unit Suffixes
(Optional
parameters) Unit suffixes can be optionally
used with most NRf type input
parameters.