GW Instek PEL-3000 Series Programming Manual - Manual (Page 103)

COMMNAND OVERVIEW
101
Example :PROGram: 1,1,1,AUTO,2.0,OFF,1.0,OFF
Sets the program settings as follows: Program no. = 1,
Step no. = 1, memory number = M001, Run = AUTO,
On-Time = 2.0 secs, Off-Time = OFF, P/F Time = 1.0
secs, Short-Time = OFF.
Query example :PROGram?
>Program:ON; Start:1, Step:1, Memory:1,
Run:Manual, On-Time:2.0, Off-Time:0.0, P/F-Time:0.0,
Short-Time:0.0
Returns the program settings for program number 1,
at step 1.
:PROGram[:RECall]:DEFault
Set
Description The default settings for the program sequence
function.
Syntax :PROGram[:RECall]:DEFault
Example :PROGram:DEFault
:PROGram:STARt
Set
Query
Description Sets or queries the program number for the
program sequence.
Syntax :PROGram:STARt {}
Query Syntax :PROGram:STARt?
Parameter (1~16) program number
Return Parameter Start:
Example :PROGram:STARt 1
Sets the program number to 1.
Query example :PROGram:STARt?
>Start:1
Returns the program number (1).