GW Instek PEL-3000 Series Programming Manual - Manual (Page 106)

PEL-3000 Programming Manual
104
Syntax :PROGram:OFFTime {[s]|OFF}
Query Syntax :PROGram:OFFTime?
Parameter [s] (0~60) Off-Time in
seconds
OFF Turns the Off-Time off.
Return Parameter Off-Time:
(a time of 0.0 is equivalent
to “OFF”)
Example :PROGram:OFFTime 1
Sets the Off-Time to 1 second.
Query example :PROGram:OFFTime?
>Off-Time:1.0
Returns the Off-Time (1 second).
:PROGram:PFTime
Set
Query
Description Sets or queries the Pass/Fail-Time for the selected
step number.
Syntax :PROGram:PFTime {[s]|OFF}
Query Syntax :PROGram:PFTime?
Parameter [s] (0 ~ (On-time + Off time -
0.1)) (in seconds)
OFF Turns the P/F-Time off.
Return Parameter P/F-Time:
Example :PROGram:PFTime 1
Sets the P/F-Time to 1 second.
Query example :PROGram:PFTime?
> P/F-Time:0.0
Returns the P/F-Time (1 second).
:PROGram:STIMe
Set
Query
Description Sets or queries the Short-Time for the selected step
number.