GW Instek PEL-3000 Series Programming Manual - Manual (Page 117)

COMMNAND OVERVIEW
115
Return Parameter Returns the next sequence in the
chain in the following format:
Chain:|OFF
Example :NSEQuence:CHAin 2
Sets the next sequence in the chain as S02.
Query example :NSEQuence:CHAin?
>Chain: 2
Returns the next sequence in the chain (S02).
:NSEQuence:EDIT
Set
Query
Description Configures the parameters for the Data Edit for
Normal Sequence menu, equivalent to entering the
FUNC>Sequence>Normal Sequence>Data Edit
menu.
Syntax :NSEQuence:EDIT
{,,,,,,
,|OFF|ON,|OFF|ON,|OFF|ON,
|OFF|ON}
Query Syntax :NSEQuence:EDIT?
Related
Commands :NSEQuence:
Parameter Parameters in order: Description
Current step number
Total number of steps
Value
Time: hours
Time: minutes
Time: seconds
Time: milliseconds
|OFF|ON LOAD setting
|OFF|ON TRIG OUT setting
|OFF|ON RAMP setting
|OFF|ON PAUSE setting