GW Instek PEL-3000 Series Programming Manual - Manual (Page 30)

PEL-3000 Programming Manual
28
16 4/ EXE
32 5/ CME
Example *ESE 8
Sets bit 3 of the ESE register.
Query example *ESE?
>12
Bits 2 and 3 are set in the Standard Event Status
Enable register.
*ESR?
Set
Query
Description Reads the Standard Event Status register. This
command will also clear the Standard Event Status
register.
Query Syntax *ESR?
Return parameter (bit weight) Bit number / Description
4 3/ QYE
8 4/ DDE
16 5/ EXE
32 6/ CME
Query example *ESR?
>48
Bits 4 and 5 are set in the Standard Event register.
*IDN?
Query
Description Queries the manufacturer, model number, serial
number, and firmware version of the instrument.
Query Syntax *IDN?
Return parameter Returns the instrument identification as a
string in the following format:
GW-INSTEK, PEL-3021, XXXXXXXX, V.VV
Manufacturer: GWINSTEK
Model number : PEL-3021
Serial number : XXXXXXXX
Firmware version : V.VV