GW Instek PEL-3000 Series Programming Manual - Manual (Page 124)

PEL-3000 Programming Manual
122
Query example :FSEQuence:TBASe?
>Time Base:0.30000
Returns the time base.
:FSEQuence:LLOad
Set
Query
Description Sets or queries the Last Load state.
Syntax :FSEQuence:LLOad {ON|OFF}
Query Syntax :FSEQuence:LLOad?
Parameter ON, 1 Turns Last Load on.
OFF, 0 Turns Last Load off.
Return Parameter Last Load:ON|OFF
Example :FSEQuence:LLOad ON
Turns Last Load on.
Query example :FSEQuence:LLOad?
>Last Load: ON
Returns the last load state.
:FSEQuence:LAST
Set
Query
Description Sets or queries the value of Last Load when Last
Load = ON.
Syntax :FSEQuence:LAST{}
Query Syntax :FSEQuence:LAST?
Parameter Current value(CC), resistance
value(CR), voltage value(CV), power
value(CP).
Return Parameter Last:
Example :FSEQuence:LAST 1.000
Sets the value of Last Load to 1.000.
Query example :FSEQuence:LAST?
>Last: 1.000
Returns the value of Last Load.