GW Instek PEL-3000 Series Programming Manual - Manual (Page 97)

COMMNAND OVERVIEW
95
:POWer:T1
Set
Query
Description Sets the T1 timer settings for the CP dynamic
mode.
Syntax :POWer:T1 {[s] | MINimum | MAXimum}
Query Syntax :POWer:T1?
Related
Commands :POWer:T2
Parameter [s] T1 timer setting in
seconds
MINIMUM or MIN Minimum time
MAXIMUM or MAX Maximum time
Return parameter Returns the T1 timer time
in s.
Example :POWer:T1 0.200
Sets the T1 timer time to 200ms.
Query example :POWer:T1?
>0.200
Returns the T1 timer time as 200ms.
:POWer:T2
Set
Query
Description Sets the T2 timer settings for the CP dynamic
mode.
Syntax :POWer:T2 {[s]| MINimum | MAXimum}
Query Syntax :POWer:T2?
Related
Commands :POWer:T1
Parameter [s] T2 timer setting in
seconds
MINIMUM or MIN Minimum time
MAXIMUM or MAX Maximum time
Return parameter Returns the T2 timer time
in ms.