GW Instek PEL-2000 Series Programming User Manual - Manual (Page 89)

COMMAND DETAILS
89
:OCP:CHANnel:END
Channel Specific
Command
Description Sets the ending current value for the test. The
value must be higher than the DUT OCP value.
Syntax :OCP:CHANnel:END {[ A ] | MIN | MAX}
Parameter [A] The current value in Amps.
MAX The maximum current value.
MIN The minimum current value.
Example :OCP:CHAN:END MIN Set the ending current to
the minimum.
Query Syntax :OCP:CHANnel:END?
Return Parameter Returns the ending current in Amps.
Query Example :OCP:CHAN:END?
10.0 Returns the ending
current.
:OCP:CHANnel:STEP:CURRent
Channel Specific
Command
Description Sets the current step resolution for the OCP Test
Automation.
Syntax :OCP:CHANnel:STEP:CURRent {[ A ] | MIN |
MAX}
Parameter [A] The current value in Amps.
MAX The maximum current value.
MIN The minimum current value.
Example :OCP:CHAN:STEP
:CURRent MIN Set the step resolution to
the minimum value.
Query Syntax :OCP:CHANnel:STEP:CURRent?
Return Parameter Returns the current step resolution in
Amps.
Query Example :OCP:CHAN:STEP:CURR?
0.5 Returns the step
resolution.