GW Instek PEL-2000 Series Programming User Manual - Manual (Page 45)

COMMAND DETAILS
45
:CONFigure:PROTection:VOLTage:STATe
Channel Specific
Command
Description Sets the voltage protection for the current/specific
channel on or off. The voltage protection can also
be cleared.
Syntax :CONFigure:PROTection:VOLTage:STATe
{OFF|0|ON|1|CLEAR|2}
Parameter CLEAR/2 Clear
OFF/0 Off
ON/1 On
Example :CONF:PROT:VOLT:STAT 1 Turns on voltage
protection.
Query Syntax : CONFigure:PROTection:VOLTage:STATe?
Return Parameter Voltage Protection state
0 Off
1 On
2 Clear
Query Example :CONF:PROT:VOLT:STAT?
0
Voltage protection is
currently off.
:CONFigure:PROTection:VOLTage:LEVel
Channel Specific
Command
Description Sets the voltage protection level for the
current/specific channel. The level can be set to
any applicable level or to the channel
maximum/minimum.
Syntax :CONFigure:PROTection:VOLTage:LEVel
[V]|MIN|MAX
Parameter Voltage Protection Level
30 30 volts
30V 30 volts