GW Instek PEL-2000 Series Programming User Manual - Manual (Page 116)

PEL-2000 Programming Manual
116
SHOW Subsystem
:SHOW[:DISPlay] dual channel .................................. 116
:SHOW[:DISPlay] single channel ............................... 117
:SHOW[:DISPlay] dual channel
Channel Specific
Command
(Dual channel module)
Description Sets the display mode of the load module of the
specific channel.
Syntax :SHOW:DISPlay
{LVI|LVW|LIW|RVI|RVW|RIW|LRV|LRI|LRW|LRS|LIRV|
LVRI|LVRI}
Parameter LVI Left channel, voltage/current
LVW Left channel, voltage/power
LIW Left channel, current/power
RVI Right channel, voltage/current
RVW Right channel, voltage/power
RIW Right channel, current/power
LRV Left and right channel voltage
LRI Left and right channel current
LRW Left and right channel power
LRS Left and right channel load on time
LIRV Left channel current, right channel
voltage
LVRI Left channel voltage, right channel
current
Example :SHOW:DISP LVI Show the left channel
voltage and current on
the load module display.