GW Instek PEL-2000 Series Programming User Manual - Manual (Page 60)

PEL-2000 Programming Manual
60
:CURRent:STATic:LOW:RISE/FALL
Channel Specific
Command
Description Sets the low range rising/falling slew rates.
Syntax :CURRent:STATic:LOW:RISE/FALL [A/uS]
Parameter [A/uS] Slew Rate
RISE/FALL 0.078A/uS Sets the rising/falling slew
rate to 0.078A/uS
RISE/FALL 1 Sets the rising/falling slew
rate to 1A/uS
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :CURR:STAT:LOW:RISE .001 Sets the rising slew rate
to 0.001A/uS.
Query Syntax : CURRent:STATic:LOW:RISE/FALL? [MIN|MAX]
Return Parameter [MAX|MIN] Slew rate
1 Unit=1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CURR:STAT:LOW:RISE?
MIN
0.078 For low range CC mode,
the Minimum value for
the rising slew rate is
0.078 A/uS for the
specific channel.
:CURRent:STATic:HIGH:AVALue/BVALue
Channel Specific
Command
Description Sets the high range A/B Value for constant current
static mode.
Syntax :CURRent:STATic:HIGH:AVALue/BVALue [A]
Parameter NRf+[A]