GW Instek PEL-2000 Series Programming User Manual - Manual (Page 105)

COMMAND DETAILS
105
Return Parameter [MAX|MIN] Slew rate
1 Unit =1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :RES:RISE? MAX
0.8000 Returns the maximum
value for the rising slew
rate (0.8 A/uS).
:RESistance:STATic:RECall
Channel Specific
Command
Description Sets or queries whether A Value or B Value is the
currently active value in CR static mode.
Syntax :RESistance:STATic:RECall {A|0|B|1}
Parameter A/0 A
B/1 B
Example :RES:STAT:REC 1 Makes B Value the active
value.
Query Syntax :RES:STATic:RECall?
Return Parameter Value
0 A
1 B
:RESistance:STATic:LOW:AVALue/BVALue
Channel Specific
Command
Description Sets the low range A/B Value for constant
resistance static mode.
Syntax :RESistance:STATic:LOW:AVALue/BVALue
[OHM]
Parameter NRf+[OHM] Resistance
AVALue 10 Sets A Value to 10 ohms.
(Low range only)