GW Instek PEL-2000 Series Programming User Manual - Manual (Page 53)

COMMAND DETAILS
53
1 On
Query Example :UTIL:SOUN?
0 Sound is currently set to
off.
:UTILity:REMote System Command
Description Turns the remote control on or off.
Syntax :UTILity:REMote {OFF|0|ON|1}
Parameter OFF/0 Turns Remote control off
ON/1 Turns remote control on
Example :UTIL:REM 1 Turns remote control on.
:UTILity:REMote:MODE System Command
Description Sets the remote mode to fast or normal. When in
fast mode, the panel interface is deactivated with
an interface time of no more than 10ms. Normal
mode has an interface time of 30~130ms. In normal
mode the display interface continues to update the
screen in real-time.
Syntax :UTILity:REMote:MODE {NORMAL|0|FAST|1}
Parameter NORMAL/0 NORMAL
FAST/1 FAST
Example :UTIL:REM:MODE 1 Turns remote mode to
fast.