GW Instek PEL-2000 Series Programming User Manual - Manual (Page 51)

COMMAND DETAILS
51
Utility Subsystem
:UTILity:AUTO:LOAD ..................................................... 51
:UTILity:AUTO:MODE ................................................... 52
:UTILity:SOUNd ............................................................. 52
:UTILity:REMote ............................................................. 53
:UTILity:REMote:MODE ................................................ 53
:UTILity:TIME .................................................................. 54
:UTILity:LOAD ................................................................ 54
:UTILity:IDENtify ............................................................ 55
:UTILity:FRAMe .............................................................. 55
:UTILity:AUTO:LOAD System Command
Description Sets the mainframe to auto mode. Upon startup the
mainframe will turn loads/programs on.
Syntax :UTILity:AUTO:LOAD {OFF|0|ON|1}
Parameter OFF/0 Turns auto loading off
ON/1 Turns auto loading on
Example :UTIL:AUTO:LOAD 1 Turns auto loading on
Query Syntax :UTILity:AUTO:LOAD?
Return Parameter Auto load status
0 Auto loading is off
1 Auto loading is on
Query Example :UTIL:AUTO:LOAD?
1 The main frame is
currently configured
to auto load.