GW Instek PEL-2000 Series Programming User Manual - Manual (Page 62)

PEL-2000 Programming Manual
62
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :CURR:STAT:HIGH:RISE
1.1 Sets the rising slew rate
to 1.1A/uS.
Query Syntax :CURRent:STATic:HIGH:RISE/FALL? [MIN|MAX]
Return Parameter [MAX|MIN] Slew rate
1 Unit=1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CURR:STAT:HIGH:RISE?
MAX
0.8000 For high range CC mode,
the maximum value for
the rising slew rate is
0.8000 A/uS for the
specific channel.
:CURRent:DYNamic:L1/L2
Channel Specific
Command
Description Sets the current levels (Level 1 & 2) for CC
dynamic mode. The command is range dependant.
If the current range is Low, then the settings will
only apply to low range.
Syntax :CURRent:DYNamic:L1/L2 [A]
Parameter NRf+[A] Current
L1 1 Sets L1 to 1 Amp.
L2 2 Sets L2 to 2 Amps.
L2 2A Sets L2 to 2 Amps.
L1/L2 MIN Sets L1 or L2 to the
minimum level for the
specific channel.