GW Instek PEL-2000 Series Programming User Manual - Manual (Page 133)

COMMAND DETAILS
133
MAX Sets the current limit to
the maximum value for the
channel
Example :VOLT:CURR 1A Sets the current limit to 1
Amp for the specific
channel.
:VOLT:CURR MAX Sets the current limit to
the maximum limit for
the specific channel.
Query Syntax :VOLTage:CURRent? [MAX|MIN]
Return Parameter 1 unit = 1 amp Current limit
1 Returns the current limit of
the specific channel.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :VOLT:CURR?
5 The current limit is 5
amps for the specific
channel.
:VOLTage:MODE
Channel Specific
Command
Description Set the constant voltage response time for the
specific channel.
Syntax :VOLTage:MODE {SLOW|0|FAST|1}
Parameter SLOW/0 Slow response time
FAST/1 Fast response time
Example :VOLT:MODE SLOW Sets the response time to
SLOW for the specific
channel.
:VOLT:MODE 1 Sets the response time to
FAST for the specific
channel.
Query Syntax :VOLTage:MODE?