GW Instek PEL-2000 Series Programming User Manual - Manual (Page 153)

COMMAND DETAILS
153
Return Parameter Point
0.0001~60000 Returns the point duration
time.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :SEQ:POIN:TIME?
0.00100 The point duration time
is 0.001 seconds.
:SEQuence:REPeat
Channel Specific
Command
Description Sets the number of times the sequence can be
repeated (looped).
Syntax :SEQuence:REPeat
Parameter Repeat setting
1~9999 1~9999
0 Infinite repeats
Example :SEQ:REP 10 Repeat 10 times
:SEQ:REP 0 Repeat infinitely
Query Syntax :SEQuence:REPeat?
Return Parameter Repeat setting
1~9999 1~9999
0 Infinite
Query Example :SEQ:REP?
10 Repeats the sequence 10
times
:SEQuence:END:LOAD
Channel Specific
Command
Description Sets On End Load to On or Off. On End Load
determines if the channel will set the load on or off
at the end of its sequence until the end of the last
sequence (of ALL other channels).
Syntax :SEQuence:END:LOAD {OFF|0|ON|1}