GW Instek PEL-2000 Series Programming User Manual - Manual (Page 85)

COMMAND DETAILS
85
MODE Subsystem
:MODE ............................................................................. 85
:MODE
Channel Specific
Command
Description This command sets the operating mode of the
specific channel. Some modes are load module
dependant.
Syntax :MODE {CCL|CCH|CCDL|CCDH|CRL|CRH|CRDL|
CRDH|CV|CPL|CPH|CVL|CVH}
Parameter CCL CC static mode, low range
CCH CC static mode, high range
CCDL CC dynamic mode, low range
CCDH CC dynamic mode, high range
CRL CR static mode, low range
CRH CR static mode, high range
CRDL CR dynamic mode, low range
CRDH CR dynamic mode, high range
CV CV mode
CPL CP static mode, low range
CPH CP static mode, high range
CVL CV static mode, low range
CVH CV static mode, low range
Example :MODE: CCL Set the specific channel
to low range constant
current static mode.
Query Syntax :MODE?
Return Parameter CCL CC static mode, low range
CCH CC static mode, high range