GW Instek PEL-2000 Series Programming User Manual - Manual (Page 123)

COMMAND DETAILS
123
:STATus:CHANnel:ENABle
Channel Specific
Command
Description Sets which events are enabled in the Channel
Status Enable register. The mask values are the bit
weights of the Channel Status Enable Register. See
page 164 for details.
Syntax :STATus:CHANnel:ENABle
Parameter Event Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not Used
Example :STAT:CHAN:ENAB 12 Events OP (Bit 3) and RV
(Bit 4) are enabled in the
Channel Status Enable
register.
Query Syntax :STATus:CHANnel:ENABle?
Return Parameter Event Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not Used
Query Example :STAT:CHAN:ENAB?
4 The OP event is enabled.
:STATus:CHANnel:EVENt?
Channel Specific
Command
Description Returns the status of the Channel Status Event
register for the specific channel. The Channel
Status Event register is cleared upon reading.
Query Syntax :STATus:CHANnel:EVENt?