GW Instek PEL-2000 Series Programming User Manual - Manual (Page 52)

PEL-2000 Programming Manual
52
:UTILity:AUTO:MODE System Command
Description Sets the mainframe auto mode as load or program.
Upon startup the mainframe can automatically
turn on loads or automatically run the last
program.
Syntax :UTILity:AUTO:MODE {PROGRAM|0|LOAD|1}
Parameter PROGRAM/0 Sets the auto load mode to
program
LOAD/1 Sets the auto load mode to
load.
Example :UTIL:AUTO:MODE 1 Auto load mode is set to
load.
Query Syntax :UTILity:AUTO:MODE?
Return Parameter Auto load mode
0 Program
1 Load
Query Example :UTIL:AUTO:MODE?
0 Auto load mode is set to
Program.
:UTILity:SOUNd
System Command
Description Turns the sound on/off for the mainframe/load
modules.
Syntax :UTILity:SOUNd {OFF|0|ON|1}
Parameter OFF/0 Turns sound off
ON/1 Turns sound on
Example :UTIL:SOUN 1 Turns sound on.
Query Syntax :UTILity:SOUNd?
Return Parameter Sound
0 Off