GW Instek PEL-2000 Series Programming User Manual - Manual (Page 77)

COMMAND DETAILS
77
Description Returns the protection levels for electronic load
Query Syntax :LOAD:PROTection?
Query Example :LOAD:PROT? Clears the Channel
Status Register.
Return Parameter Condition Condition
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 16-128 Not Used
Query Example :LOAD:PROT?
0 Returns the status of the
Channel Status Register.
Here 0 is returned
indicating no protection
settings have been
tripped.
:LOAD:PROTection:CLEar
Channel Specific
Command
Description This command clears the Channel Status Register
for the specific channel. See page162.
Syntax :LOAD:PROTection:CLEar
Example :LOAD:PROT:CLE Clears the Channel
Status Register.
:LOAD:TIME?
Channel Specific
Command
Description This command displays the total load on time. If
the load is on, the load time when the command
was issued is displayed.
Query Syntax :LOAD:TIME?
Return Parameter 1unit = 1 second Load on time
2.2 2.2 seconds