GW Instek PEL-2000 Series Programming User Manual - Manual (Page 59)

COMMAND DETAILS
59
:CURRent:STATic:LOW:AVALue/BVALue
Channel Specific
Command
Description Sets the low range A/B Value for constant current
static mode.
Syntax :CURRent:STATic:LOW:AVALue/BVALue [A]
Parameter NRf+[A]
AVALue 1 Sets A Value to 1 Amp.
(Low range only)
BVALue 2 Sets B Value to 2 Amps.
(Low Range only)
AVALue 1A Sets A Value to 1 Amp.
(Low range only)
AVALue MIN Sets A Value to the
minimum level for the
specific channel.
AVALue MAX Sets A Value to the
maximum Level for the
specific channel.
Example :CURR:STAT:LOW:AVAL 1 Sets low range CC static
mode A Value to 1 amp.
Query Syntax :CURRent:STATic:LOW:AVALue/BVALue? [MAX|MIN]
Return Parameter [MAX|MIN] Current
1 unit = 1 amp Returns the current of the
A or B Value.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CURR:STAT:LOW:BVAL?
MAX
2 Returns the maximum
current allowed for the
channel. (PEL-2020)