GW Instek PEL-2000 Series Programming User Manual - Manual (Page 137)

COMMAND DETAILS
137
Query Example :POW:CURR?
7.0 Returns the current limit
for the specific channel.
:POWer:RECall
Channel Specific
Command
Description Sets or queries whether A Value or B Value is the
currently active value in CP mode.
Syntax :POWer:RECall A/0, B/1
Parameter A/0, B/1 Value
A/0 A
B/1 B
Example :POW:REC 1 Makes B Value the active
value.
Query Syntax :POWer:RECall?
Return Parameter Value
0 A
1 B
Query Example :POW:REC?
0 A Value is active.
:POWer:LOW:AVALue/BVALue
Channel Specific
Command
Description Sets the low range A/B Value for constant power
mode.
Syntax :POWer:LOW:AVALue/BVALue [W]
Parameter NRf+[W]
AVALue 1 Sets A Value to 1 watt.
BVALue 1W Sets B Value to 1 watt.
AVALue MIN Sets A Value to the
minimum level for the
specific channel.