GW Instek PEL-2000 Series Programming User Manual - Manual (Page 36)

PEL-2000 Programming Manual
36
MAX Last channel
MIN First channel
Example :CHAN:DISP 1 Sets to the active channel
on the display to ch1.
Query Syntax :CHANnel:DISPlay? [MAX|MIN]
Return Parameter Channel displayed
1~8 CH1 ~ CH8
MAX/MIN Returns the allowable
maximum or minimum.
Query Example :CHAN:DISP?
1 Channel 1 is currently
active on the display.
:CHANnel:MEMo
Channel Specific
Command
Description Creates or returns the “memo” that is displayed in
the “System Information” screen in the Utility
Menu. This memo only applies to this specific
channel. The memo will replace the serial number
information in the “System Information” screen.
Syntax :CHANnel:MEMo
Parameter/
Return parameter String containing memo.
Example :CHAN:MEM “this is a
memo” Sets to the memo to “this
is a memo”.
Query Syntax :CHANnel:MEMo?
Query Example :CHAN:MEM?
this is a memo Returns the memo
message.