GW Instek PEL-2000 Series Programming User Manual - Manual (Page 159)

COMMAND DETAILS
159
GLOBal Subsystem
:GLOBal:CONFigure:VOLTage:RANGe ..................... 159
:GLOBal:LOAD:SHORt ................................................ 159
:GLOBal:MODE ............................................................ 159
:GLOBal:CONFigure:VOLTage:RANGe Global Command
Description Sets the CC Voltage range high or low. This
command applies to all channels.
Syntax :GLOBal:CONFigure:VOLTage:RANGe {L|H}
Parameter L Low range
H High range
Example :GLOB:CONF:VOLT:RANG L Sets the range to low.
:GLOBal:LOAD:SHORt Global Command
Description Shorts all the input terminals.
Syntax :GLOBal:LOAD:SHORt {OFF|0|ON|1}
Parameter {OFF|0|ON|1} SHORT
OFF/0 Off
ON/1 On
Example :GLOB:LOAD:SHOR 0 Short on.
Query Syntax :GLOBal:LOAD:SHORt?
:GLOBal:MODE Global Command
Description Sets the mode for all the load modules in the
mainframe.