GW Instek PEL-2000 Series Programming User Manual - Manual (Page 81)

COMMAND DETAILS
81
:MEASure:POWer?
Channel Specific
Command
Description This query returns the measured power of the
specific channel.
Query Syntax :MEASure:POWer?
Return Parameter 1 unit = 1 watt Power at the load input
1.0000 1.0000 watts
Query Example :MEAS:POW?
1.5 1.5 watts is measured at
the specific channel load
input.
:MEASure:INPut
Channel Specific
Command
Description This command is for compatibility with other
instruments only and has no action.
Syntax :MEASure:INPut {LOAD|0| UUT|1}
Parameter LOAD/0 Disabled
UUT/1 Enabled
Example :MEAS:INP 0 Disable voltage sense.
Query Syntax :MEASure:INPut?
Return Parameter Voltage Sense
0 Disabled
1 Enabled
Query Example :MEAS:INP?
1 Returns the voltage
input status. Voltage
sense is enabled.