GW Instek PEL-2000 Series Programming User Manual - Manual (Page 33)

COMMAND DETAILS
33
Channel Subsystem
:CHANnel[:LOAD] .......................................................... 33
:CHANnel:ACTive ........................................................... 34
:CHANnel:SYNCon ........................................................ 34
:CHANnel:SYNCon:ALL ................................................. 35
:CHANnel:ID? ................................................................. 35
:CHANnel:DISPlay .......................................................... 35
:CHANnel:MEMo ........................................................... 36
:MEMo? ........................................................................... 37
:CHANnel[:LOAD]
Channel Specific
Command
Description Selects the channel that the channel specific
commands use. This command will not change the
channel in the display screen.
Syntax :CHANnel[:LOAD]
Parameter Channel selected
1~8 CH1 ~ CH8
MAX CH8
MIN CH1
Example :CHAN 1
Sets channel 1 as the
specific channel.
:CHAN:LOAD 1 Sets channel 1 as the
specific channel.
Query Syntax :CHANnel? [LIST]
Return Parameter Current specific channel
1~8 CH1 ~ CH8
LIST Lists available channels
Query Example :CHAN? LIST
1, 2 Channel 1 and 2 is
available.