GW Instek PEL-2000 Series Programming User Manual - Manual (Page 65)

COMMAND DETAILS
65
Query Example :CURR:DYN:LOW:T1?
2.5
:CURR:DYN:LOW:T1?
MIN
0.000025 Returns the T1 time of
2.5 seconds.
Returns the minimum T1
time allowable for the
specific channel and
range.
:CURRent:DYNamic:LOW:L1/L2
Channel Specific
Command
Description Sets the low range current levels (Level 1 & 2) for
CC dynamic mode.
Syntax :CURRent:DYNamic:LOW:L1/L2 [A]
Parameter NRf+[A] Current
L1 1 Sets L1 to 1 Amp. (low
range only)
L2 2 Sets L2 to 2 Amps. (low
Range only)
L2 2A Sets L2 to 2 Amps. (low
Range only)
L1/L2 MIN Sets L1 or L2 to the
minimum level for the
specific channel.
L1/L2 MAX Sets L1 or L2 to the
maximum Level for the
specific channel.
Example :CURR:DYN:LOW:L1 10 In low range CC dynamic,
Set L1 (level 1) to 10
amps.
Query Syntax :CURRent:DYNamic:LOW:L1/L2? [MIN|MAX]
Return Parameter [MAX|MIN] Current
1 unit= 1 amp Returns the current of
L1/L2, or the maximum or
minimum current allowed.