GW Instek PEL-2000 Series Programming User Manual - Manual (Page 110)

PEL-2000 Programming Manual
110
:RESistance:DYNamic:LOW:RISE/FALL
Channel Specific
Command
Description Sets the low range rising/falling slew rate for CR
dynamic mode for the specific channel.
Syntax :RESistance:DYNamic:LOW:RISE/FALL [A/uS]
Parameter [A/uS] Slew Rate
RISE/FALL 0.8A/uS Sets the rising/falling slew
rate to 0.8A/uS
RISE/FALL .1 Sets the rising/falling slew
rate to 0.1A/uS
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :RES:DYNA:LOW:RISE 0.1 Sets the rising slew rate
to ~ 0.1A/uS.
Query Syntax :RESistance:DYNamic:LOW:RISE/FALL? [MIN|MAX]
Return Parameter [MAX|MIN] Slew rate
1 Unit=1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :RES:DYN:LOW:FALL?
MIN
0.8000 For low range dynamic
CR mode, the minimum
value for the falling slew
rate is 0.8 A/uS for the
specific channel.
:RESistance:DYNamic:LOW:T1/T2
Channel Specific
Command
Description Sets the timers T1 or T2 for CR dynamic mode for
the specific channel in low range.
Syntax :RESistance:DYNamic:LOW:T1/T2 [S|ms]