GW Instek PEL-2000 Series Programming User Manual - Manual (Page 121)

COMMAND DETAILS
121
Return Parameter Go/NoGo voltage
1 unit = 1 amp Returns the limit current
Query Example :SPEC:CURR:H?
5.120 The current limit is 5.12
amps.
:SPECification:TEST:
Channel Specific
Command
Description Turns the Go/NoGo specification (SPEC) limits
on/off.
Syntax :SPECification:TEST {OFF|0|ON|1}
Parameter OFF/0 OFF
ON/1 ON
Example :SPEC:TEST OFF Turn Go/NoGo SPEC
off for the specific
channel.
Query Syntax :SPECification:TEST?
Return Parameter Go/NoGo SPEC status
0 Off
1 On
Query Example :SPEC:TEST?
1 Go/NoGo SPEC limits is
on.