GW Instek PEL-2000 Series Programming User Manual - Manual (Page 75)

COMMAND DETAILS
75
LOAD Subsystem
:LOAD[:STATe] ................................................................ 75
:LOAD:SHORt[:STATe] .................................................. 75
:LOAD:SHORt:KEY ......................................................... 76
:LOAD:PROTection? ...................................................... 76
:LOAD:PROTection:CLEar ............................................. 77
:LOAD:TIME? .................................................................. 77
:LOAD:DELay .................................................................. 78
:LOAD:TYPE .................................................................... 78
:LOAD[:STATe]
Channel
Specific Command
Description This command turns the electronic load on/off for
the specific channel.
Syntax :LOAD[:STATe] {ON|1|OFF|0}
Parameter ON/1 Load On
OFF/0 Load Off
Example :LOAD ON Turns the specific
channel load on.
Query Syntax :LOAD[:STATe]?
Return Parameter Load module
1 Load is On
0 Load is Off
Query Example :LOAD? Turns the specific
channel load on.
:LOAD:SHORt[:STATe]
Channel Specific
Command
Description This command shorts the electronic load on/off for
the specific channel.
Syntax :LOAD:SHORt[:STATe] {ON|1|OFF|0}