GW Instek PEL-2000 Series Programming User Manual - Manual (Page 146)

PEL-2000 Programming Manual
146
Example :MEM:REC:SET 1 Recalls the setup data
from S1 (applicable to all
channels).
Example :MEM:REC:100
Recalls memory data
M100 to the current
channel.
:MEMory:FILE:PRESet System Command
Description Sets or returns the preset settings using block data.
See the command syntax on page 13 for more
details on block data.
Syntax :MEMory:FILE:PREset
Parameter Preset data
Example :MEM:FILE:PRE data> Loads the preset settings
block data.
Query Syntax :MEMory:FILE:PREset?
Return Parameter Returns the preset settings
as block data.
Query Example :MEM:FILE:PRE?
#count> Returns the preset
settings as block data.
:MEMory:FILE:PROGram System Command
Description Sets or returns the program data using block data.
See the command syntax on page 13 for more
details on block data.
Syntax :MEMory:FILE:PROGram
Parameter Program data
Example :MEM:FILE:PROG data> Loads the program data
using block data.
Query Syntax :MEMory:FILE:PROGram?