GW Instek PEL-2000 Series Programming User Manual - Manual (Page 8)

PEL-2000 Programming Manual
8
RS-232C Interface Configuration
RS-232C
configuration Connector DB-9, Male
Baud rate 2400, 4800, 9600, 19200, 38400
Parity None, Odd, Even
Data bit 8 (fixed)
Stop bit 1, 2
Panel operation 1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP SHIFT
2. Press the Shift Key then the Help
key to access the Utility menu.
F3
3.
03/02/09
10 : 30
O
RS232 Interface
Configure Other
System
Info
Interface Time Set Load
Baud rate
Stop Bit
Parity 38400
1
None
RS232
4. If the interface is not set to RS232,
use the selector knob to change
the interface to RS232.